2007 Acura Mdx Sh-awd on 2040-cars

Auto blog

2020 Acura TLX PMC Edition will be hand-built alongside the NSX

At next week's 2019 New York International Auto Show, Acura will reveal a pair of new models, the 2020 TLX PMC Edition and MDX PMC Edition Prototype. The duo will be limited-run models that get final assembly at Honda's Performance Manufacturing Center (PMC) in Marysville, Ohio, along the same production line as the Acura NSX. The TLX PMC Edition goes on sale this summer with a starting price of around $50,000. Production will be limited to just 360 models hand-assembled over a six-month period. The production version of the MDX PMC Edition will be built sometime after the TLX PMC run is complete. Think of the TLX PMC as an A-Spec performance model with features available with the Advance Package like a surround-view camera, heated rear seats, a heated steering wheel and power folding mirrors. Currently, the two packages are mutually exclusive. There are no performance upgrades beyond what the A-Spec already offers. Power from the 290-horsepower 3.5-liter V6 is sent to all-four wheels through a nine-speed automatic. The TLX PMC uses Acura's Super-Handling All-Wheel Drive (SH-AWD) to manage the power at each wheel. It also gets the A-Spec's stiffer dampers and quicker steering ratio. 2020 Acura TLX PMC Edition View 11 Photos The exterior design, too, is based on the TLX A-Spec, with a restyled front bumper, dark chrome trim, larger exhaust tips and a black spoiler. Likewise, the interior is based on the A-Spec trim, with heated and ventilated front sport seats, leather and Alcantara seating, a black leather steering wheel, a black headliner, a red instrument cluster and red accent lighting. Black 19-inch 10-spoke wheels and Valencia Red Pearl paint are exclusive to the TLX PMC. The paint uses mica, metal flake and super-high transparency nano pigments to give it a richer color and was previously only available on the NSX. The roof panel, door handles, grille and lower bumper are also gloss black. What makes the TLX PMC Edition (as well as the future MDX PMC) truly special is the hand assembly. Basically, the body-in-white (a basic unfinished unibody) will move from the main assembly plant in Marysville to the nearby Performance Manufacturing Center. There, workers will install the drivetrain, suspension, wiring harnesses and electronics. The car then goes to the paint booth before the interior is installed.

Acura NSX bodywork to be sheathed in zirconium e-coat, fewer paint layers

Automakers make halo cars to drum up excitement and show off what they can do, but there's more to it than that. Advanced platforms allow a company's engineers to experiment with all sorts of technologies. And in the case of the upcoming new Acura NSX, that includes new paint processes.
Speaking with Autoline in this video interview, Honda's North American Senior VP Jon Minto talked about an innovative zirconium e-coat which it's applying to the new NSX. Unlike some experimental paints developed for Formula One, however, this coating is not designed to minimize drag or enhance cooling: it's designed to be more environmentally friendly.
It's one of a few measures which Honda is implementing on the NSX before expanding it to more accessible models, along with another process that uses fewer coats to reduce energy consumption by 40 percent. Watch the interview with Autoline host John McElroy right here.

Acura NSX production delayed

Listeners of the Autoblog Podcast will be familiar with my opinions on the Acura NSX. While I love the idea of Acura building a halo car again, I've routinely joked on-air that the car will never, ever reach production and will continue being teased and previewed ad nauseam. So I'm chuckling at this news: the NSX is being delayed again. To be fair, while it sounds like a big deal – pushing the NSX back from model year 2016 to 2017 – this is a fairly minor delay in the grand scheme. Instead of starting production this fall, as previously announced, the new supercar will start rolling down the line at Honda's Marysville, OH factory in the spring. "Trial production" has already started, Honda says, while briefly acknowledging the delay in the attached press release. While Honda offered no reason for the delay in volume production, Automobile claims it's the fault of the move to fit two turbochargers to the V6, which was made midway through development. Fitting the two iron lungs meant rearranging the six-pot into a longitudinal layout. Here's hoping there are no further delays. Scroll on for a look at Honda's press release, which does its best to gloss over the NSX delay while talking about the company's new Performance Manufacturing Center in Marysville. Related Video: Performance Manufacturing Center: Precision Craftsmanship Aug 14, 2015 - CARMEL-BY-THE-SEA, Calif. The next-generation Acura NSX is produced at the new, dedicated Performance Manufacturing Center (PMC) in Marysville, Ohio, using domestic and globally sourced parts. With trial production already underway and production start-up scheduled for spring 2016, this world-class manufacturing facility employs groundbreaking techniques in weld, body construction, body painting, final assembly and quality confirmation to ensure the highest levels of precision and craftsmanship. More details on the unique and innovative manufacturing processes at the PMC will be rolled out over the months leading up to the start of production, but the following highlights of the new facility were shared during the 2015 Monterey Automotive Week: Innovative blend of people and technology: throughout the PMC, NSX production is centered around the skills of approximately 100 experienced engineers and technicians building the NSX to precise levels of quality and craftsmanship.