2006 Acura Mdx Touring, Navigation, Xm, Tow Pkg, Heated Seats, Two Owners on 2040-cars

Auto blog

We drive the Acura TLX-GT racecar

Don't break the car. As you can tell from the video, that's the theme of the day at Gingerman Raceway in South Haven, MI. After two short lapping sessions in the Acura TLX-GT fear gave way to familiarity, and a second theme emerged: this is awesome. The anxiety was appropriate. There are only two TLX-GTs in the world, and both were at Gingerman that day. A mishap would potentially put either Ryan Eversly and Peter Cunningham out of contention for the subsequent Pirelli World Challenge race. I did not want to be that guy. But back to the awesome part. The TLX-GT is barely TLX, but more Acura that you might expect. The wheelbase, roof, and doors are all stock dimensions, although all the bodywork is carbon fiber. Out go the front MacPherson struts, in goes a special double-wishbone suspension. All-wheel drive comes from an XTRAC six-speed sequential transmission originally developed for Dakar Rally vehicles. The side mirrors are stock. Under the hood lies a 3.5-liter twin-turbo V6 with a stock block, head, crank, and throttle body. "Under the hood" is a generous term, though, because half of the engine sits inside the cabin. The front end of the block is aft of the front axle - the rest of the hood is taken up with radiators and hoses. To service the turbochargers, the RealTime mechanics remove the top of the dashboard. The front-mid engine location pushes the driver's seat back to the B-pillar, so you sit like Hightower from Police Academy. Only with less visibility. This does not calm the nerves. Nor does the din of 600 or so unmuffled horsepower. My first laps were understandably timid. But the TLX-GT is actually easy to drive. You get used to the low, rearward seating position almost immediately. Once rolling you don't need the clutch for shifts - just bang the right and left paddles to go up and down. I even became accustomed to the acceleration. At more than 3,000 pounds curb weigh the TLX-GT is quick, but not as explosive as cars like the Chevrolet Corvette Z06. Where the TLX-GT blows away road cars is in grip and braking, neither of which I fully exploited. The brake pedal is so hard you feel like you're standing on it just to get the pads to bite. Once engaged, they're like an endless well of deceleration, with ABS somewhere down at the bottom of the abyss. Second lapping session over, car returned intact and adrenaline high in full effect. I had the uncontrollable urge to get back behind the wheel. I mean, I barely had time to get up to speed.

Acura NSX is industry's first supercar with a female design lead

Michelle Christensen. Unless you've been casting about the web for some behind-the-scenes takes on recent exotic car launches or were unusually curious during the early days of the sport crossover trend, her name probably means nothing to you. She grew up in Northern California, where her family drag-raced. Venerables like the 1932 Ford, Plymouth GTX, and Dodge Super Bee rolled through her family garage. And Christensen grew up designing prom dresses for friends and dreaming of working in a pit crew. In fact, she didn't even realize car design was a real profession until junior high, when her father pointed out Chip Foose at a car show. After that, she was hooked, so she went to Art Center College of Design in Pasadena, where she reimagined the Plymouth Barracuda as her senior project. Today, Christensen can add the title of lead exterior designer on the 2016 Acura NSX to her resume. The first woman to lead the shape of a supercar, Christensen actually opened up her "First!" account with Acura in 2005 when the company swooped her up the night of graduation and she became its first female exterior car designer. Her first sketch on the job was a concept for the ZDX, and the bigwigs chose her design for production. She joined the NSX team after the mid-engined concept was introduced at the 2012 Detroit Auto Show, replacing the front-engined V10 concept (we encourage you to go back and look at what was versus what is). Christensen thereafter led a crew of eight through a rework of the sheetmetal, with the focus being to keep the "emotional, 3-D kind of feeling." Reminiscing about her family's utterly unadorned '32 Ford hot rod, she said the NSX team was committed to keeping the design simple and light. Wind tunnel work led to larger bumper, hood and side intakes for better airflow on the production model. That, along with a switch in engine position, gave them a chance to go aggressive and to not only "punch more holes in it and make it more exotic," but also "take it to the gym and beef it up." In line with its decidedly un-retro rebirth, the third brake light that runs across the decklid is about the only nod to its predecessor. At age 34, we're certain we haven't seen the last of Christensen or her designs. Related Video:  

2020 Acura TLX PMC Edition will be hand-built alongside the NSX

At next week's 2019 New York International Auto Show, Acura will reveal a pair of new models, the 2020 TLX PMC Edition and MDX PMC Edition Prototype. The duo will be limited-run models that get final assembly at Honda's Performance Manufacturing Center (PMC) in Marysville, Ohio, along the same production line as the Acura NSX. The TLX PMC Edition goes on sale this summer with a starting price of around $50,000. Production will be limited to just 360 models hand-assembled over a six-month period. The production version of the MDX PMC Edition will be built sometime after the TLX PMC run is complete. Think of the TLX PMC as an A-Spec performance model with features available with the Advance Package like a surround-view camera, heated rear seats, a heated steering wheel and power folding mirrors. Currently, the two packages are mutually exclusive. There are no performance upgrades beyond what the A-Spec already offers. Power from the 290-horsepower 3.5-liter V6 is sent to all-four wheels through a nine-speed automatic. The TLX PMC uses Acura's Super-Handling All-Wheel Drive (SH-AWD) to manage the power at each wheel. It also gets the A-Spec's stiffer dampers and quicker steering ratio. 2020 Acura TLX PMC Edition View 11 Photos The exterior design, too, is based on the TLX A-Spec, with a restyled front bumper, dark chrome trim, larger exhaust tips and a black spoiler. Likewise, the interior is based on the A-Spec trim, with heated and ventilated front sport seats, leather and Alcantara seating, a black leather steering wheel, a black headliner, a red instrument cluster and red accent lighting. Black 19-inch 10-spoke wheels and Valencia Red Pearl paint are exclusive to the TLX PMC. The paint uses mica, metal flake and super-high transparency nano pigments to give it a richer color and was previously only available on the NSX. The roof panel, door handles, grille and lower bumper are also gloss black. What makes the TLX PMC Edition (as well as the future MDX PMC) truly special is the hand assembly. Basically, the body-in-white (a basic unfinished unibody) will move from the main assembly plant in Marysville to the nearby Performance Manufacturing Center. There, workers will install the drivetrain, suspension, wiring harnesses and electronics. The car then goes to the paint booth before the interior is installed.