2000 Acura Integra Gs Hatchback 3-door 1.8l on 2040-cars

Auto blog

Honda discontinuing Euro Accord, no replacement in sight

Honda has built two Accords for many years. There's the one we're familiar with here in the United States, and then there's the Accord sold in markets like Europe and Australia, known here in the US as the Acura TSX. But just like Acura did with the TSX, the Euro-market Accord has been discontinued.
The news comes from The Motor Report in Australia, which is reporting that the Accord Euro will be discontinued in 2015. Sold Down Under alongside the US-market model, the discontinuation of the Aussie car indicates an end to Honda's midsize sedan efforts in Europe, where there is no obvious replacement for the four-door and wagon models.
According to TMR, Honda Australia Director Stephen Collins indicated that focus will be placed instead on the US market "wide-body" model, as it's known. That said, this decision doesn't sound like it's sitting too well in Oz.

Mid-engine Honda sports car surfaces in EU patent drawings

Based on new patent drawings, Honda clearly isn't done with sports cars. The design you see above was registered and published by the European Union Intellectual Property Office (EUIPO) and was first reported by AutoGuide. The drawings show a rakish, angular sports car design that is very clearly mid-engine. It could almost pass for a Lamborghini. But the name on the design is Honda Motor Company, and aside from the name, it bares a strikingly similar appearance to a mid-engine design found in a Honda patent two years ago. In fact, the only major difference between this car and the older one (seen below) is the lack of a windshield and top. The shape of the lights and the grille, as well as the front fender vent and character lines running from it, are reminiscent of the S660 kei roadster for Japan. The large, angular intakes look more related to the Acura NSX, though. View 6 Photos Unlike the previous patent renderings of the car, this one has an interior, and the inclusion of it may be why the top and windshield are absent. The interior also leads us to believe that this design is for an upcoming concept. The steering wheel is a small, rectangular piece similar to what you would find in an F1 car or Indy car. The seats also look like thin buckets designed to be as sporty and light as possible. A production version would probably have a bit more cushioning and a round wheel. It does look like there is a pushbutton transmission setup in the center console like current Acuras, though. So what does this mean? Honda is clearly still working on this design, and based on some of the more radical design choices for the interior, we're likely looking at a concept car that will show up in the next couple of years. Whether a concept will lead to a production car is tough to say. There's definitely room in Honda's global sports car roster between the S660 and NSX for something in between, and Honda has reported that it's getting pressure from dealers for sporty cars. The exterior design isn't so extreme it couldn't be tweaked for production, either. There have also been rumors that Honda is preparing a mid-engine hybrid sports car with the Type R's turbocharged four-cylinder. Honda also holds a trademark for the name "ZSX," which fits the naming scheme of the NSX and old RSX, but at least in Europe, Honda has held the trademark since 2009. We'll just have to wait and see what Honda does.

Acura confirms more 2016 NSX details

Acura served up a slew of engineering details about the soon-to-launch 2016 NSX. Fittingly, they were explained at a dinner at the SAE International World Congress in Detroit, where morsels about the new Acura supercar were likely gobbled up quicker than the main course. Among the highlights: The NSX will mark Acura's first use of a multimaterial space frame, and it includes high-strength steel and aluminum. This will allow the NSX to hit its weight targets, while maintaining rigidity. The NSX uses a so-called "ablation" technology, which allows the ultra-rigid castings to be used within the car's crush zones. For more details on this, scroll through the press blast below. As expected, the NSX will pack a twin-turbo V6 engine, and Acura confirmed it will displace 3.5 liters. The unit will be mounted amidships and team with hybrid components to increase performance and efficiency. The supercar also features the most advanced evolution of Acura's Super Handling All-Wheel-Drive system, and it's capable of distributing more torque than any other setup the brand has used. The NSX has 10 air-cooled heat exchangers that will cool the powertrain, and the V6 alone will have three radiators. There are also twin intercoolers in the side air intakes that further cool the system. The next generation of the NSX was unveiled in January at the Detroit Auto Show, and production launches this fall in Ohio. Related Video: New Technical Details of the Next Generation Acura NSX Revealed at SAE 2015 World Congress and Exhibition . DETROIT, April 23, 2015 – In advance of the market launch of the highly anticipated next generation Acura NSX, the engineers leading the supercar's development shared new technical details and design strategies with the automotive engineering community at the April 22nd SAE Detroit Section dinner, held in conjunction with the SAE 2015 World Congress and Exhibition. Additional information about the team's efforts to achieve a true "New Sports Experience" included details of the NSX's world's first body construction process that helped create a multi-material space frame resulting in class-leading body rigidity, the advanced total airflow management system and an update on NSX's power unit specifications. Ted Klaus, chief engineer and global development leader of the new NSX, introduced key powertrain, body and dynamic performance engineers who shared new product and technical details in their related areas of the development.