1997 Honda Civic Ex Coupe 2-door 1.6l on 2040-cars

Auto blog

10 of 18 midsize SUVs earn 'good' IIHS side impact safety rating

It's not terribly surprising that midsize SUVs earned better safety ratings than small SUVs in the latest side-impact tests performed by the Insurance Institute for Highway Safety (IIHS). Just how much better they scored, on the other hand, certainly raises an eyebrow. Ten out of 18 midsize SUVs earned the highest rating of 'good' in the stringent new test, altered for vehicles starting with the 2020 model year with a heavier barrier (4,200 pounds) that moves at a higher speed (37 miles per hour) and is fitted with a hard honeycomb frontal structure. By way of contrast, just one out of of 20 small SUVs earned a 'good' score.  SUVs that receiving 'good' scores were the Ford Explorer, Infiniti QX60, Lincoln Aviator, Mazda CX-9, Nissan Pathfinder, Subaru Ascent, Toyota Highlander, Volkswagen Atlas, Volkswagen Atlas Cross Sport and Volkswagen ID.4. For EV fans, it's worth noting the ID.4 was the only electric vehicle included in the test. The Buick Enclave and Chevrolet Traverse scraped away with 'acceptable' ratings while the Honda Passport, Honda Pilot, Hyundai Palisade, Jeep Wrangler 4-door, Kia Telluride and Nissan Murano were deemed merely 'marginal' in the tough new test. Only two models — the Mazda CX-9 and Volkswagen ID.4 — earned a "Good" rating in every test category.  Interestingly, the Jeep Wrangler would have scored a 'good' rating if it were equipped with side airbags for the rear seating positions. It would likely be an engineering challenge to equip its removable top and/or doors with airbags, but the lack of that safety feature allowed the head of the rear passenger dummy to hit the vertical support of the top. Otherwise, the Wrangler scored good ratings across the board. The new Ford Bronco, which makes more allowances for side-impact safety, has not yet been tested.  The popular Hyundai Palisade and Kia Telluride SUVs stand out in the test with 'poor' ratings for driver pelvis injuries. The Nissan Murano, a vehicle last redesigned for the 2015 model year, was the only vehicle tested that received a 'poor' rating for its structure and safety cage. Videos of the tests of 12 of these 18 SUVs can be found on the IIHS' YouTube page. Related video: Green Buick Chevrolet Ford Honda Hyundai Infiniti Jeep Kia Mazda Nissan Subaru Toyota Volkswagen Safety Crossover SUV IIHS Insurance Institute for Highway Safety

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

British automakers take costly precautions as Brexit 'no deal' fears grow

LONDON — Carmakers in Britain have triggered some Brexit contingency plans, such as certifying models in the EU, and are working on redrawing production schedules and stockpiling more parts to defend against any loss of unfettered trade after Brexit. The moves are aimed at ensuring plants, which rely on the just-in-time delivery of tens of thousands of components, can keep operating after Brexit on March 29, but will add costs and bureaucracy which could risk their long-term viability. London and Brussels hope to agree a deal by the end of the year to avoid tariffs and trade barriers, but Prime Minister Theresa May's proposals have been criticized by both Brexiteers, who want a cleaner break from the bloc, and the European Union. McLaren Automotive is looking at having its cars certified by both a British and an EU agency to smooth sales. It is also planning to stockpile critical components and change shipments into the EU around Brexit if there is disruption. "I will sell a little more in January and February and plan to pick the volume up in May and give us a leaner period through the change point," Chief Executive Mike Flewitt told Reuters. BMW, which said last week it would move the annual summer-time shutdown of its British Mini plant next year to April, is looking for lorry parking areas and warehousing on both sides of the channel and is seeking to sign contracts to lease certain locations, a spokesman said. It is also investing in IT systems to handle any new red tape as carmakers estimate tens of thousands of new documents could be needed if tariffs and customs are imposed. The German carmaker's Brexit plans are costing millions of pounds, a source familiar with the matter told Reuters. But Honda, which builds 10 percent of Britain's 1.67 million cars at its Swindon plant in southern England, is not in the market to buy "huge amounts of warehousing space," its Europe boss Ian Howells told Reuters. "It's been a very precise calculation or estimation of what components need to be brought in," he said, adding the firm could also alter its output to sell more into the EU at the start of next year. Waste of money? Many British carmakers have also asked suppliers to look into how they would handle delays at ports, executives told Reuters, as thousands of parts, engines and finished models move between Britain and the continent every day.