2012 Gmc Canyon Crew Cab Z71 4x4 Auto Tow Hitch 12k Mi Texas Direct Auto on 2040-cars

Auto blog

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.

GMC's Bronco-slaying SUV will remain a dream, report says

GMC won't help rival Ford in its quest to dethrone the Jeep Wrangler, according to a recent report. The body-on-frame off-roader the firm planned as an alternative to the upcoming Bronco and the fourth-generation Wrangler allegedly fell victim to a top-down restructuring plan implemented recently by parent company General Motors. Citing anonymous inside sources, Muscle Car & Trucks reported the rugged SUV remained part of GMC's long-term product plan until November 2018. It was shaping up to be one of the company's most distinctive models in decades. It should have arrived as a dedicated off-roader developed and sold exclusively by GMC; it wouldn't have had a twin in the Chevrolet portfolio. The problem, according to the report, is that the off-roader (which might have revived the heritage-laced Jimmy nameplate) should have been built on the 32XX platform designed to underpin the next Chevrolet Colorado/GMC Canyon twins. General Motors canceled that project to save money, so the SUV was consigned to the attic before we even spotted prototypes testing on and off the pavement. The updated pickups will instead arrive on an evolution of the frame found under the models currently found in showroom. There's no word on why that architecture can't support a Wrangler-like SUV. GMC never confirmed plans to build an off-roader aimed at the Jeep Wrangler and the upcoming Ford Bronco, so it certainly won't validate reports claiming it has canceled the model. This isn't the first time we've heard about a body-on-frame SUV made by a brand in the General Motors portfolio, though. Hummer was supposed to take the fight directly to Jeep with an off-roader accurately previewed by the 2008 HX concept, but it shut down before it finished developing the model. Rumors of GMC picking up where Hummer left off have come and gone on a shockingly regular basis over the past few years, yet the Wrangler remains in a class of one.

GMC says it's 'considering' an all-electric Sierra pickup

GM loves to talk about its electric future — Cadillac was just announced as the brand's official electric division — but trucks haven't been mentioned as a part of this electric revolution, so far. However, that may be changing. CNBC spoke with Duncan Aldred, vice president of GMC about the potential for an electric GMC Sierra. He replied, "Certainly, it's something we're considering." As the Sierra goes, so does the Chevrolet Silverado, and vice versa. But it would make sense for GM to introduce electrification to GMC first, followed by the Silverado. GMC already gets premium features such as the Multi-Pro tailgate are GMC exclusives, after all. It's also marketed as more high-end and premium, which could help make the cost of an electrified Sierra easier to recoup for GM, and easier to stomach for customers. This electric truck consideration could be in response to Ford's aggressive declaration of an electric F-150 the other day, as well as the electric concept trucks from Rivian and Bollinger. The concepts in particular have generated much excitement for their ridiculous claimed performance and shocking utility. If GMC is only "considering" it, then we imagine the brand isn't too far along the development path, if it's even started. Regardless, it's the most affirmative stance we've seen GM take on total electrification of a full-size pickup truck yet. We asked GMC for confirmation and for any clarification it could provide us on the Sierra's electric future, but a spokesperson responded with, "no comment." Related video: