1995 Dodge Ram 3500 Diesel Cummins Brand New Motor on 2040-cars

Auto blog

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

Dodge recalls 121,603 examples of Dart for loss of brake assist

Dodge will recall 121,603 worldwide examples of the 2013-2014 Dart with the 2.0- and 2.4-liter engines because of possible loss of power brake assistance. The company reports two minor injuries and seven accidents potentially related to this problem. The affected models have build dates before Jan. 24, 2014. There are 105,458 of these vehicles in the US; 11,996 in Canada; 3,705 in Mexico; and 444 outside of NAFTA. This campaign doesn't affect Darts with the 1.4-liter engine. These vehicles' brake-booster vacuum tube routing can potentially allow oil to access and eventually to degrade the brake booster diaphragm. If this happens, then the vehicles could lose braking assist. The brakes themselves would continue to work, but the driver would experience longer stopping distances. A pop or similar sound of a vacuum leak sometimes precedes the problem, according to the automaker. Dealers will inspect the components and replace the vacuum tube. If technicians find oil in the tube, they'll also swap out the vacuum pump, brake booster, and master cylinder. Affected owners will receive notice from the company within the next 60 days. Statement: Vacuum-tube Assembly December 3, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 105,458 compact sedans in the U.S. to inspect and replace vacuum-tube assemblies and certain other components, as required. Some of the affected vehicles may be subject to oil migration that could affect their brake systems' power-assist feature. Foundation brake function is unaffected. However, if this condition occurs, the driver may notice hard pedal-feel on brake application, and longer distances may be required to stop the vehicle in emergency situations. An FCA US investigation identified certain model-year 2013-14 vehicles equipped with 2.0-liter and 2.4-liter engines, may have brake-booster vacuum-tube routing that inadvertently allows oil to reach the brake booster diaphragm, if ever the vacuum-pump check valve fails. Oil may degrade the diaphragm and lead to a loss of brake-assist – a feature that helps reduce stopping distances. FCA US is aware of two minor injuries and seven accidents that are or may be related to this condition. The recall is limited to model-year 2013-14 Dodge Dart sedans produced before Jan. 24, 2014. It also affects an estimated 11,996 cars in Canada; 3,705 in Mexico and 444 outside the NAFTA region. Vehicles equipped with 1.4-liter engines are excluded.

Are supercars becoming less special?

There's little doubt that we are currently enjoying the golden age of automotive performance. Dozens of different models on sale today make over 500 horsepower, and seven boast output in excess of 700 hp. Not long ago, that kind of capability was exclusive to supercars – vehicles whose rarity, performance focus, and requisite expense made them aspirational objects of desire to us mortals. But more than that, supercars have historically offered a unique driving experience, one which was bespoke to a particular model and could not be replicated elsewhere. But in recent years, even the low-volume players have been forced to find the efficiencies and economies of scale that formerly hadn't been a concern for them, and in turn the concept of the supercar as a unique entity unto itself is fading fast. The blame doesn't fall on one particular manufacturer nor a specific production technique. Instead, it's a confluence of different factors that are chipping away at the distinction of these vehicles. It's not all bad news – Lamborghini's platform sharing with Audi for the Gallardo and the R8 yielded a raging bull that was more reliable and easier to live with on a day-to-day basis, and as a result it went on to become the best-selling Lambo in the company's history. But it also came at the cost of some of the Italian's exclusivity when eerily familiar sights and sounds suddenly became available wearing an Audi badge. Even low-volume players have been forced to find economies of scale. Much of this comes out of necessity, of course. Aston Martin's recent deal with Mercedes-AMG points toward German hardware going under the hood and into the cabin of the upcoming DB11, and it's safe to assume that this was not a decision made lightly by the Brits, as the brand has built a reputation for the bespoke craftsmanship of its vehicles. There's little doubt that the DB11 will be a fine automobile, but the move does jeopardize some of the characteristic "specialness" that Astons are known for. Yet the world is certainly better off with new Aston Martins spliced with DNA from Mercedes-AMG rather than no new Astons at all, and the costs of developing cutting-edge drivetrains and user interfaces is a burden that's becoming increasingly difficult for smaller manufacturers to bear. Even Ferrari is poised to make some dramatic changes in the way it designs cars.