03 Chevy Ssr Yellow on 2040-cars

Auto blog

Camaro spy shots show subtly different grille, front fascia

It looks like there some changes in store for the Chevrolet Camaro - the only thing is that we just don't know what Chevy has up its sleeve. Looking at these spy shots, we'd initially be inclined to think that there is just a minor facelift or a new special edition, but upon closer inspection, there are a few oddities about this car that definitely have us intrigued.
The most obvious difference on this prototype is the slightly restyled front fascia with a smaller lower air inlet and the two-bar grille. Then we get to some of the car's mysterious details. For starters, this fascia has the SS vent above the grille, but it looks to be blocked off. Granted this could just be a one-off piece used for testing. What really piqued our interest was at the rear of the car where it has quad exhaust outlets that are used on the ZL1. Could this be the LS7-powered Camaro that we reported on back in December?
At this point, your guess is as good as ours as to what we're looking at here, so let us know in the comments what you think this could be.

Why 2015 is going to be a huge year for trucks

Nissan chief executive Carlos Ghosn took center stage to introduce the 2016 Titan last week at the Detroit Auto Show. He spoke of the truck's new features, impressive Cummins V8 diesel engine and the extensive amount of time and money required to build a modern, competitive pickup truck. "We have done all of this because we see opportunity – an opportunity in the unmet needs of today's American truck customers," Ghosn said. He was speaking about the Titan, but his thoughts echo the industry's mindset: When it comes to trucks, find an opportunity and attack. Even with CAFE regulations looming and fickle consumer preferences, investing in trucks is a no-brainer for automakers. Some consumers will always need a truck for their job or lifestyle. And some people will always want one, whether they need it or not. With that in mind, here are four reasons why the pickup-truck sector is more important than ever and poised for growth in 2015. View 24 Photos The Nissan Titan Is Back Okay, it never left, but the Titan hadn't been redesigned since its launch in 2003, and Nissan sold more NV200s than Titans in 2014. It's an understatement to say the truck was languishing. That all changes with the 2016 model. The Titan will come in two variants, a traditional fullsize competitor and the Titan XD. The XD will lead the market launch, and it arrives late this year. It's pitched as a "whitespace" offering, Nissan sales and marketing vice president Fred Diaz said. The idea is to offer something in the general size and price range of a fullsize truck, but also have some of the capability of a heavy-duty truck. The XD uses a fully boxed ladder frame, the chassis design from Nissan's commercial division, and the wheelbase is about 20 inches longer than other Titan models. The XD, which Nissan is calling the flagship of the line, will be the only model with the 5.0-liter Cummins turbodiesel V8. It produces 310 horsepower and 555 pound-feet of torque, while being able to tow 12,000 pounds. V6 and V8 gasoline models will also be offered on the Titan XD and the standard, non-XD model. When production ramps up, the Titan will be sold with several cabs, beds and trims. New features include trailer sway control, an integrated trailer brake controller, more storage options in the cabin and even laminated front and rear side glass to reduce outside noise. All of this has given Nissan fresh confidence in an area where it admittedly has been lacking. "We can compete," Diaz told Autoblog.

Even if GM does close all 5 of those plants, it'll still have too many

DETROIT — General Motors' monumental announcement on Monday that it will close three car assembly plants and two powertrain plants in North America and slash its workforce will only partially close the gap between capacity and demand for the automaker's sedans, according to a Reuters analysis of industry production and capacity data. Sales of traditional passenger cars in North America have been declining for the past six years and are still withering. After GM ends production next year at factories in Michigan, Ohio and Ontario, it will still have four U.S. passenger-car plants — all operating at less than 50 percent of rated capacity, according to figures supplied by LMC Automotive. In comparison, Detroit-based rivals Ford and Fiat Chrysler Automobiles will have one car plant each in North America after 2019. The Detroit Three are facing rapidly dwindling demand for traditional passenger cars from U.S. consumers, many of whom have shifted to crossovers and trucks. Passenger cars accounted for 48 percent of retail light-vehicle sales in the United States in 2014, according to market researchers at J.D. Power and Associates. This year, sedans will account for less than a third of light vehicle sales. That shift in turn has left most North American car plants operating far below their rated capacities, while many SUV and truck plants are running on overtime. The collapse in passenger-car demand is a challenge for nearly all automakers in the United States, including Japan's Toyota and Honda, which have the top-selling models in the compact and midsize car segments. Toyota executives said last month they are evaluating the company's U.S. model lineup. But Toyota also plans to build compact Corolla sedans at a new $1.6 billion factory it is building in Alabama with partner Mazda. The obstacles facing GM in its plans to close more auto factories became apparent on Tuesday as U.S. President Donald Trump threatened to block payment of government electric vehicle subsidies to GM. While it is not certain that Trump unilaterally has the power to do that, he made it clear he intends to use his office to pressure the company to keep open a small car plant in Ohio that GM says will stop building vehicles in March.